Vista re-install..

[fluffybunny]

Probleem siis selline et arvutiga ei olnud kaasa Vista CD. Kas oleks võimalik teha re-install ka kuidagi teisiti? Oleks väga abi vaja, kuna progred ei taha õigesti töötada.

[valgekotkas]

Probleem siis selline et arvutiga ei olnud kaasa Vista CD. Kas oleks võimalik teha re-install ka kuidagi teisiti? Oleks väga abi vaja, kuna progred ei taha õigesti töötada.

järelikult peab kusagil kettal olema peidetud (hidden) partitsioon millel kükitab recovery installikas ...

[fluffybunny]

aga kuidas ma sellele recoverile ligi pääseksin, ma otsisin kõik kohad läbi.

[valgekotkas]

aga kuidas ma sellele recoverile ligi pääseksin, ma otsisin kõik kohad läbi.

kui Sulle "hidden" midagi ei öelnud siis parem ära otsi ja pöördu mõne tuttava arvutipoisi/tüdruku juurde ... vista puhas install kasutades taasteimaget eeldab nagunii pisut üle keskmise oskusi ...

[tsaarsataan]

Kui sa ostsid arvuti poest,siis müüja sulle raudselt ütles,et kui lähed koju tee recovery plaat.Eeldan,et tegu hp läpakaga.

[dreamants]

Kui sa ostsid arvuti poest,siis müüja sulle raudselt ütles,et kui lähed koju tee recovery plaat.Eeldan,et tegu hp läpakaga.

Viimasel ajal pole see ainult HP arvutitel. Fujitsu Siemensi AMILO Notebook Pa 3553-l aga ei olnud see partitsioon peidetud ja väga lihtne oli recovery plaate teha. Kui on peidetud, soovitaksin vastava firma servisest küsida kuidas recoveri plaate teha, muidugi kui juhendeid alles ei ole.

[mustkass]

No hp-l see recovery plaatide tegemine ka paras jama,ise tegingi valesti ja noh nüüd pole enam midagi teha,see oli juba ammu.Samas miks neid originaal plaate enam kaasa ei panda xp home-l oli küll,kas ka profil ei tea.

[fluffybunny]

mm arvuti on fujitsu siemens amilo notebook pi3540..
arvuti juhised on ka olemas
aga mis mõttes recoveri plaat, kuna ma suht võhik nendes asjades:)

[valgekotkas]

mm arvuti on fujitsu siemens amilo notebook pi3540..
arvuti juhised on ka olemas
aga mis mõttes recoveri plaat, kuna ma suht võhik nendes asjades:)

ma Sulle soovitasin ja seda mitte paha pärast - mine mõne tuttava itika juurde

[mcm]

Proovi helistada FS'i helpdeski ja uuri kas nad saavad sinu mudeli recovery kettad saata sulle. Vahel tulevad nad vastu ja saadavad tasuta postiga plaadid koju.

Recovery plaadi pealt saad taastada masina algse seisu.
PS! See kustutab kõik andmed arvutist, niiet tee enda failidest backup, kuhugi välisele meediale (usbhdd, dvd, vms).

[fluffybunny]

Aga kuidas ma täpselt recovery teen?
kas see on midagi c-formati sarnast?

[mcm]

Kui saad recovery plaadid, siis boodid nendelt ta recovery peaks suht automaatselt toimuma. Bioses vbolla pead muutma boot device järjekorda, et plaadilt ikka booditaks.

Siin on juhend kuidas teha recoverit kui recovery meedia on kõvaketta peidetud partitisioonil:

3.2 Restoring the system from the hard disk
Your personal data could be lost during restoration of the factory default settings. The
operating system is restored on the system partition on which the factory default
settings were installed. Data on other partitions or hard disks is unaffected by this
restore processes. Should your system be attacked by 'uninvited guests' from the Net,
such as viruses, reformat all hard disks and restore your system with the system restore
disks provided with the computer or which you have created.
Caution If you would like to set up a RAID system on your PC or notebook, you must
create your system restore disks before you do so.
If you need to use these disks, it may first be necessary to terminate the
RAID connection.
Please also note that, in the case of RAID systems already installed, it is
possible that restoring the hard disk as described below may not function.
Caution! Personal data could be lost during restoration of the factory default settings.
Proceed as follows to restore the factory default settings:
1. Turn your machine on
or:
If the PC is already running, switch the machine off, wait for a moment and then
switch it on again.
2. During the boot process, press the F8 key at very frequent intervals, until the menu
"Advanced Boot Options" appears. Repeat this process if necessary in order to
gain access to this menu.
3. The "Advanced Boot Options" menu will offer you the "Repair your Computer"
function. If this is not the case, use the up/down keys (À;À9) to select "Repair your
Computer" and confirm with the Enter key.
4. Once Windows has loaded a few files, "System Recovery Options" will appear.
Under "Select a language" and "Select a keyboard layout:" specify the language
and keyboard layout. As a rule, the language will be automatically recognised by
the system and is marked in grey. Click on "Next".
5. Under "User name:" enter the user name and the "Password". The user name will
also be available in the selection menu and can be called up by clicking on the
black triangle. If you have not assigned a password for the user selected, leave the
"Password" field empty. Then click on "OK".
6. In the following "System Recovery Options" menu, select the option "Fujitsu
Siemens Computers Recovery" with the sub-item "Easy backup and recovery
of your system".
7. In the next menu, select "Restore the as-delivered status" and click on "Next".
8. In the menu "Restore factory default settings", choose the option "From hard
disk (recommended)" from "Select source" and confirm with "Next".
9. The next message informs you that all data could be lost. Once you have
confirmed this message, your system is restored.
On completion of the restoration process, a confirmation message will be
displayed.
10. Select "Exit" to close the process.
11. In the following "System Recovery Options" menu, select
"Restart".
12. After the restart, you must make some adjustments. To do this, follow the onscreen
instructions.

[fluffybunny]

Tähh!
Sain arvuti korda, kõik paistab norm olevat