vatson kirjutas:aandra kirjutas:Sain dreami jälle käima, 5.18 ka toimima...
Respekt. Mina uurisin ja puurisin seda 5.18 zip-faili, lugesin readme-d, aga seal sisalduvad installi-juhised on minu meelest selgelt poolikud. Räägitakse seal ju sellest, kuhu kopeerida konfi- ja võtmefailid, aga mitte sellest kuhu panna programmifailid ja mis nimedega. Üritasin seda siis oma peaga leiutada, aga paaritunnise nuputamisega ei saanudki asja toimima. Installisin praegu 5.16.
Äkki viitsid täpsemalt kirjeldada, kuidas sellest zipist newcamd installimine käib.
Vaata seda, ainult inglisekeelne:
HOW-TO INSTALL NEWCAMD 5.18 ON ORIGINAL DMM IMAGES IN 5 MINUTES AND 15 STEPS,
WITHOUT UNPACKING AND REPACKING THEM
Hi all
just prepared a new simple doc, which explains how to install newcamd 5.18 on original images, WITHOUT UNPACKING THEM, and without headaches
))
Only 15 steps:
1) install an original DMM image (I used latest beta 108_2)
2) Create directory /var/bin, from Telnet:
mkdir /var/bin [enter]
3) On newcamd 5.18 zip (unzipped) archive, rename the file newcamd.ppc to newcamd and copy it to /var/bin (with a FTP proggy)
4) On newcamd 5.18 archive, rename the file betad.dream to betad and copy it to /var/bin (with a FTP proggy)
5) On newcamd 5.18 archive, rename the file cardserver.dream to cardserver and copy it to /var/bin (with a FTP proggy)
6) Now give permissions 755 to all these files just copied, from Telnet:
chmod 755 /var/bin/* [enter]
7) Create directory /var/lib, from Telnet:
mkdir /var/lib [enter]
Get (from newcamd archive) the library "libcrypto.so.0.9.7" and put it to /var/lib (with a FTP proggy)
9) Now the hardest part...
))
Copy the following lines, all together.
Then paste them into Telnet window and press [enter] key, when Telnet window end scrolling.
These lines will build the 3 files needed for configuring newcamd and cardserver (with original cards), and the init file for starting emu and cardserver at boot.
10) let's start with "newcamd.conf", all needed settings:
CFG="/var/tuxbox/config/newcamd.conf" &&
echo "DEMUX_API = 2" > $CFG &&
echo "BOX_TYPE = DM7000" >> $CFG &&
echo "CONTROL_WORD_DEVICE = CA" >> $CFG &&
echo "CA_API = 3" >> $CFG &&
echo "GTX_OUTPUT_MODE = 16" >> $CFG &&
echo "PMT_UPDATE_WATCH = no" >> $CFG &&
echo "EMU = yes" >> $CFG &&
echo "PREFER_EMU = yes" >> $CFG &&
echo "DISABLE_CAM = yes" >> $CFG &&
echo "CAM_CASYS = 17" >> $CFG &&
echo "AU = yes" >> $CFG &&
echo "SHOW_ALL_CA_SYSTEMS = no" >> $CFG &&
echo "OSD = none" >> $CFG &&
echo "OSD_WEB_LOGIN = root:dreambox" >> $CFG &&
echo "CA_INFO_FILE = /tmp/cainfo.txt" >> $CFG &&
echo "DEBUG_ECM = no" >> $CFG &&
echo "DEBUG_EMM = no" >> $CFG &&
echo "DEBUG_CWS = no" >> $CFG &&
echo "DEBUG_CAM = no" >> $CFG &&
echo "DEBUG_CAM_HEX = no" >> $CFG &&
echo "SHOW_CW = no" >> $CFG &&
echo "SHOW_PAT = no" >> $CFG &&
echo "SHOW_PMT = no" >> $CFG &&
echo "SHOW_ECM = no" >> $CFG &&
echo "SHOW_CAT = no" >> $CFG &&
echo "SHOW_EMM = no" >> $CFG &&
echo "SHOW_CWS_ECM = no" >> $CFG &&
echo "SHOW_CWS_EMM = no" >> $CFG &&
echo "EMM_REPORT_WRONG_SIG = no" >> $CFG &&
echo "OSD_WAIT_TIME = 2000" >> $CFG &&
echo "DEFAULT_CW_DELAY = 500" >> $CFG &&
echo "RELOAD_CONFIG_ON_ZAP = yes" >> $CFG &&
echo "RELOAD_KEYLIST_ON_ZAP = no" >> $CFG &&
echo "CWS = dreambox 10000 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver" >> $CFG &&
echo "CWS = dreambox 10001 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver" >> $CFG &&
echo "CWS_CONNECT_TIMEOUT = 20" >> $CFG &&
echo "CWS_INCOMING_PORT = 12000" >> $CFG &&
echo "CWS_DEBUG_PORT = 12001" >> $CFG &&
echo "ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00" >> $CFG
11) and now cardserv.cfg - same as before: remember to press [enter] after pasting of the lines:
CFG="/var/tuxbox/config/cardserv.cfg" &&
echo "DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14" > $CFG &&
echo "SERVER_NAME = cardserver" >> $CFG &&
echo "DEBUG_PORT = 12002" >> $CFG &&
echo "ENTITLEMENT_PORT = 12003" >> $CFG &&
echo "ADMIN_PORT = 12004" >> $CFG &&
echo "ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00" >> $CFG &&
echo "USER = root dreambox lan dreambox 12000" >> $CFG &&
echo "SERIAL_PORT = 0" >> $CFG &&
echo "TCP_PORT = 10000" >> $CFG &&
echo "EMM-G = yes" >> $CFG &&
echo "EMM-S = yes" >> $CFG &&
echo "EMM-U = yes" >> $CFG &&
echo "SPECIAL_FEATURES = yes" >> $CFG &&
echo "SERIAL_PORT = 1" >> $CFG &&
echo "TCP_PORT = 10001" >> $CFG &&
echo "EMM-G = yes" >> $CFG &&
echo "EMM-S = yes" >> $CFG &&
echo "EMM-U = yes" >> $CFG &&
echo "SPECIAL_FEATURES = yes" >> $CFG
12) AND, finally...
))
the start file (init).
We can't obviously edit the standard rcS file, because we haven't unpacked the image, as our goal is to install newcamd 5.18 without unpacking...
))
So, we will use /var/etc/init instead.
Here's Our last cut&paste for building /var/etc/init:
IN="/var/etc/init" &&
echo "touch /tmp/.enigma" > $IN &&
echo "while [ -e /tmp/.enigma ]" >> $IN &&
echo "do" >> $IN &&
echo "rm -rf /tmp/camd.socket" >> $IN &&
echo "/var/bin/cardserver" >> $IN &&
echo "/var/bin/newcamd" >> $IN &&
echo "/bin/enigma" >> $IN &&
echo 'ret=$?' >> $IN &&
echo 'case $ret in' >> $IN &&
echo "0)" >> $IN
echo "rm /tmp/.enigma" >> $IN &&
echo "/sbin/halt" >> $IN &&
echo ";;" >> $IN &&
echo "3)" >> $IN &&
echo "killall -9 newcamd" >> $IN &&
echo "killall -9 cardserver" >> $IN &&
echo "rm /tmp/.enigma" >> $IN &&
echo "umount /var" >> $IN &&
echo "umount /hdd" >> $IN &&
echo "sleep 2" >> $IN &&
echo "/tmp/reboot" >> $IN &&
echo ";;" >> $IN &&
echo "4)" >> $IN &&
echo "rm /tmp/.enigma" >> $IN &&
echo "/sbin/reboot" >> $IN &&
echo ";;" >> $IN &&
echo "*)" >> $IN &&
echo ";;" >> $IN &&
echo "esac" >> $IN &&
echo "killall -9 newcamd" >> $IN &&
echo "killall -9 cardserver" >> $IN &&
echo "done" >> $IN &&
echo "/sbin/reboot" >> $IN &&
chmod 755 $IN
13) If you want, you can check now for the presence of the three auto-builded files:
/var/tuxbox/config/newcamd.conf
/var/tuxbox/config/cardserv.cfg
/var/etc/init
14) Restart Dreambox!
15) DONE!!! After restarting, you'll have an original image with Newcamd 5.18 installed and working.
It is that easy!!
)))
NOTE:
If you do flash erase, you will lost all the insterted and edited files... so... DON'T do flash erase!
))
Leidsin sellise uudise, ei tea kas tõepõhi ka all, kel võimalus testige. Endal kahjuks veel nö uus Viasati NDS card puudub.
st tähendab kui püüdsin cardserv file läbi ftp muuta