Tähelepanu hiinlaste ja netboxide omanikud!

[tigekala]

Proge... Kontrollimaks, kas on "pommiga" või ilma...

[satikas]

Gemini v4.31 DM500 Maxvar timebomb de-activated

Please take the time to read

GEMINI 4.30
Our clone box recognition mechanism caused large waves in the last days and many opinions have been told to us. On the one hand there have been the enraged owners of clone, who had to install their addons manually now without Blue panel. Then there have been the people who simply did not understand Linux and the GPL and accused us of GPL-breach. Also a financial dependence or support from Dream Multimedia and or sponsors was subordinated to us.

On the other hand there have been over 1500 users of our forum who singned our explanation.

All in all our action was accepted very positively and we achieved our intended goal to give an impulse the owners of clone boxes. There have also been cases in which people who thought they owned a genuine Dreambox noticed because of this action that they are owners of a clone box. Too our own surprise according to unconfirmed messages, now one of the manufacturer changed over to supply their own images.

Recapitulatory we note, it was never our intention to insert a waterproof recognition and to get in a Cat-and-mouse game between us and the box manufacturer. Our intension was to push a general discussion to create a consciousness on the clone and reproduction problem and to disasociate us from the clones, too. In the context of our possibilities as image developer we have used the one and only available possibility to make our point of view clear. As image-developer we have absolutly no influence on sponsors, dealers or Dream Multimedia. Our influence on the persons and companies involved in this relationship is very limited and lacked also on support from some places. In any case we get attention on our displeasure and we did not send newsletters of our sponsors containing information about clones. We will keep this in the future.

As we all are Dreambox fans we would like to say clearly, that it is in the exclusive responsibility of Dreammultimedia to proceed against clones. Only DMM has the possibilities (e.g. legal) which might be the only effective method against clones.

For us as Gemini developer and operators of the IHAD this action is now finished. With the upcoming release 4.3.1 of the Gemini Project the clone recognition will be deactivated. We nevertheless ask everyone to use its influence to proceed against clones.

Download 4.31 de-activated timebomb
Faili leiab antud info kodukalt: http://www.satelliteforum.net/satellite/showthread.php?t=2103

Kuivõrd ei oma kloone siis ei ole ka testinud.

[kain]

Proge... Kontrollimaks, kas on "pommiga" või ilma...

Mismoodi see proge seda kontrolli teostab?
Puht tehnilise külje pealt huvitab, kuidas ta Dreamiga ühendub?

Ise ma seda exe't käima lasta ei julenud... ja tegelt pole midagi kontrollida kah

[martinj]

Proge... Kontrollimaks, kas on "pommiga" või ilma...

Mismoodi see proge seda kontrolli teostab?
Puht tehnilise külje pealt huvitab, kuidas ta Dreamiga ühendub?

Ise ma seda exe't käima lasta ei julenud... ja tegelt pole midagi kontrollida kah

Kontrollib üle võrgu - sisestad ip.
Kusjuures hoiatuseks, et see fail ei tundu olema eriti puhas. Tulemüür näitas kahtlaste ühenduste tekkimiskatseid.
Õnn, et pole viitsinud ammu oma klooni torkida
G. 3.6 jookseb suurepäraselt.
Kui töötab - ära näpi.

[tigekala]

Nagu DCC-gi... Paned Dreami IP ja...
100% kloon ja Gemini 3.50... Mulle vastab proge:
Check results
Checking complete, no clone bomb
Kernel head.ko is 303840 bytes
Aga mõnele teisele vastas:
Potential risk clone bomb

[seltsimees]

Gemini v4.31 DM500 Maxvar timebomb de-activated = bullshit

see jutt ei vasta tõele - vähemalt see exe mille tõmbasin (virtuaalmasinas igajuhuks) käima näitas mul siin ühes boxis ilusasti punast tuld ja kisas et Potential risk ......., noh ajasin siis Nabilo selga - sellega jäi see checker rahule. Aga see nabilo ei meeldinud mulle ja ajasin siis selle deaktiveeritud gemini peale. Ja nüüd siis jälle see checker kisab.

Nii et - pole vajadust esialgu seda imaget Geminilt peale toppida. Siin on jätkuvalt miskit üleliigset.
Proovin veel gemini 4.20 ära

4.2 proovitud - ei kisanud selle peale

[valgekotkas]

lihtsalt uudishimust - kas keegi võib kinnitada, et on oma silmaga näinud adios amigos unelaulu ja kas sellest igavesest unest on ka mõni box uuesti elule toodud
kui see kedagi huvitab siis ei ole mul ei rõõmu ega kahjurõõmu nendest sündmustest - pole mul ei originaali ega klooni ...

[karla]

Unelaulu pole näinud, seda näitab ta kuni restardini, aga selliseid boxe mis unelaulu nätasin on juba üsna mitu kogunenud

[spiiker]

Selline info siis, kes viitsib võib omal riisikol katsetada.

How to become a CLONE ORIGINAL of DreamBox

The procedure SHOULD RESOLVE THE PROBLEM: I do not have a clone DREAMBOX then I have not personally tested.

The attack towards clones of DreamBox is done remotely controlling the MAC address of your receiver.

The clones and the originals have MAC address similar, but NOT the same: the clones have a MAC address that starts so 00:12:25: xx: xx: xx [that identifies the network card of your clone produced by Motorola] while the original DMM have a MAC address that starts so 00:09:34: xx: xx: Xx [network interface card produced by the same DMM].

Having said that, you can change the MAC address of your decoder, making your clone identical to the original [with regard to the MAC address of course]:

Building a init file with a different MAC address, simply using the NOTEPAD: put in the file as follows

Code:
ifconfig eth0 down ; ifconfig eth0 hw ether 00:48:21:0A:33:26 ; ifconfig eth0 up

And save the file as. Init

With DCC2.94 [or any other program to transfer files on your DMM or cloen that is] copy the file. Init in the / var / etc.

Revenue in telnet on your decoder and write

Code:
ifconfig eth0 down ; ifconfig eth0 hw ether 00:09:34:xx:xx:xx ; ifconfig eth0 up

Where: xx: xx: xx can put any value you want [for example 00:09:34:12:34:56]:
press ENTER to run the command.
To verify that your MAC address has been changed actually typed

Code:
ifconfig

And press ENTER to run the command

To check what your MAC address in advance, you can enter the following command

Code:
/proc/bus/dreambox

And pressing ENTER to run

In summary:

If the MAC address begins with 00:12:25 your decoder is a FAKE
If the MAC address begins with 00:09:34 your decoder is ORIGINAL DMM

I hope that helped a little with this problem

[kain]

Kindel on 1, et tollel kirjutajal on suuri raskusi inglise keelega ja ilmselt sellest tulenevalt ei suuda ta oma mõtet korrektselt edastada.

Seda, mis ma sealt välja loen, et rünnak üle Interneti tehakse, on ikka väga raske uskuda.

The attack towards clones of DreamBox is done remotely controlling the MAC address of your receiver.

[greedy]

iseparandajatele

http://dream.altmaster.net/showthread.php?t=2091
abiks ikka

[martinj]

Aga huvitab ennastki, millepoolest originaalid ja koopiad tarkvarale erinevad paistavad, kas tõesti mac aadress või on mõned muud bitid kuskil püsti/pikali.

[spezwend]

midagi on kahtlast.

bomb checker ütleb, et risk, aga mac on 00:09:34:xx:xx:xx

peal on 4.31

[tigekala]

See tähendab seda, et juba kusagil on Su Dreami MAC aadressi muudetud. Vaheta 3.50 peale.

[Noizemaker]

heh mul ka originaal ja pasundab ka et potenisial risk:S üks kloon ka aga õnneks veel töötab:S